Tip Your Editors | Mobile Edition |  RSS Feeds | US Edition Babblebaby | Defamer | Gizmodo | Kotaku | Lifehacker

Access Your Computer Anytime and Save Energy with Wake-on-LAN

Posted by Adam Pash at 4:00 AM on January 25, 2008

wol-win.pngYou want access to your home computer wherever you are, whatever you're doing, whether that's via a remote desktop connection, SSH, FTP, web interface, or any other remote access you've set up. The catch is, you don't like throwing money away to an always-on system. Luckily you can have your digital cake and eat it, too, and today I'll show you how to boot and shut down your system remotely so that it's ready for you when you need it and it's not wasting energy when you don't.

 

The cornerstone of this setup is a feature available to almost all newer computers known as Wake-on-LAN (or WOL), which—as the name suggests—turns on your PC through your local network. Wake-on-LAN is a breeze to set up and use on your local network, and with a little legwork you can set it up so you can wake your computer away from your home network, as well.

First I'll show you how to enable Wake-on-LAN on your computer, starting with enabling the feature in the BIOS and finishing by choosing the correct system settings. Then I'll show you several methods you can use to wake your computer using this feature, from waking your computer through your browser to different applications made specifically for this purpose.

NOTE: Wake-on-LAN only works with wired network connections.

Set Up Wake-on-LAN in Your BIOS and Operating System

The Wake-on-LAN feature can work in a couple of ways. First, it can boot your system from a completely shutdown state. Second, Wake-on-LAN can restore your system from a hybernated (Windows) or sleeping state (Mac). If you're working in Windows, you may need to tweak your BIOS (the firmware your computer's motherboard runs before it boots your operating system) before you start using Wake-on-LAN. Once your BIOS is set, you need to find and adjust a few system settings to allow you to wake up your computer using the Wake-on-LAN feature.

Enable Wake-on-LAN in Your BIOS

bios-setup.pngTo access your BIOS, restart your computer and press and hold the Delete key (or whatever key your BIOS prompts you to hold) to enter the BIOS setup. Once you're in the BIOS, head to the Power management section and look for a Wake-on-LAN setting. If you find one, go ahead and make sure it's enabled, then save and exit your BIOS and start up your computer. Not all BIOS will have a straight-up Wake-on-LAN option, and on some boards you may have to enable a "Power On By PCI Devices" setting. It varies from board to board, so a little trial and error may be in order.

Now you're ready to enable WOL in your operating system.

Enable Wake-on-LAN in Windows

wol-win.pngTo enable Wake-on-LAN in Windows, right-click My Computer (or Computer in Vista), select Properties, then click on Device Manager (in XP that's in the Hardware tab). Find your network card in the hardware list, right-click it and click Properties again. First go to the Power Management tab and tick the checkbox next to Allow this device to wake the computer.

wake-from-shutdown.pngNow head to the Advanced tab, which is full of options for your network adapter. We're concerned with two options here. The first is the Wake From Shutdown entry near the end of the list. Scroll down to it and change the value to On. The next setting I tweaked was Wake-Up Capabilities (right below Wake From Shutdown), setting the value to Magic Packet. Hit OK and everything should be set. You're ready to use the Wake-on-LAN feature using one of the methods described below.

I also had to update the drivers for my network adapter through the Device Manager for it to work, so for good measure you might want to do the same (right-click your network card and select Update drivers and let it download the latest from the internet).

Enable Wake-on-LAN in OS X

wake-on-sleep.pngTo enable Wake-on-LAN for you Mac, open the Energy Saver Preference pane, click Options, and then tick the Wake for Ethernet network administrator access checkbox. That's all there is to it.

Methods and Applications for Waking Your Computer with WOL

Now that you've enabled Wake-on-LAN in both your BIOS (if necessary) and you're operating system, how do we go about actually waking up your computer? There are actually a number of methods for doing so, from issuing the wake command using your router to apps made specifically for this process. I'll highlight a few of these methods below.

Wake Your Computer from Anywhere with Your Web Browser

The easiest way to issue a Wake-on-LAN command from outside your local network is through your web browser, and the absolutely simplest way to do that is through your router.

If you've followed either of our methods for turning your cheap-o $60 router into a super-charged $600 router with either Tomato, DD-WRT, or even HyperWRT (which we haven't covered), then you've got all the tools you need to turn on your computer from anywhere with an internet connection. Since I'm currently running Tomato, I'll show you how to work it there, but if your router supports Wake-on-LAN, it shouldn't vary much.

wol.pngFirst point your browser to the Tomato admin interface and give it your username and password to get started. If you're working outside of your local network, you'll need to either know your external IP address or have set up a free domain with DynDNS. Once you're in, click Tools -> WOL in the sidebar. All of your available devices are listed, and all you have to do to issue one a Wake-on-LAN command is click on it. Simple, right?

If you don't have a router that can handle WOL, you can still wake your computer from your browser using services like Wake On Lan from DSL Reports. In order to issue the Wake-on-LAN command from outside your network through a service like this, you'll first need to set up port forwarding for UDP port 9 to the computer you want to wake up on your local network (here's how that works).

wake-pc-remote.pngNow you just need to know your external IP address or have assigned a domain name to your home computer, and the MAC address of the computer you want to wake. To find a computer's MAC address in Windows, type ipconfig/all at the command prompt and find the series of 12 letters and numbers next to Physical Address. On a Mac, run the Network Utility application and write down the address next to Hardware Address. Give the webapp your IP address and the MAC address of the PC you want to wake up and voilà—the Wake-on-LAN command should be issued and your computer should start up or wake up straight away.

Wake Your Computer with Freeware

mps.pngIf you don't have a router supported by the Tomato or DD-WRT firmware, there are still other simple tools made to send wake-up commands to your computer. For Windows, one good looking option is called Magic Packet Sender. It can save your WOL profiles so sending that command is quick and simple.

Mac users should check out WakeOnLan, which offers both a regular app and a Dashboard widget. It scans your local network and grabs all of the local devices so it's easy to find one and wake it up.

What To Do Now that Your Computer is On

vnc-hamachi-fullsize-thumb.pngWe've covered tons of remote access possibilities here at Lifehacker, and here are a few of my favourites that you may want to use now that you've started up your computer:

Remotely Shut Down Your Computer

When you're finished accessing your home computer, you still may want to shut it down to save energy when you're finished with it. Fact is, now that you've got remote access, there are lots of different ways you can go about shutting down your computer remotely. If you're connected via SSH, you can shut down your computer from the command line. Likewise, you can easily shut down your computer graphically from a remote desktop or VNC connection the same way you would shut it down locally. If you feel like getting a bit more creative, here's how to shut down Windows with a text message.

I haven't exhausted the methods you can use to remotely wake up or shut down your computer, but these should give you a good start. If you have your own preferred methods that I didn't mention above, let's hear your tips in the comments.

Adam Pash is a senior editor for Lifehacker who wants access to his computer any time but doesn't want his electric bill to reflect that. His special feature Hack Attack appears every Friday on Lifehacker.

Tags: feature | hack attack | how to | networking | port forwarding | remote computing | remote control | router

Comments (AU Comments · US Comments)

There are currently no AU comments for this post.

Post Your Comment

Lifehacker Australia moderates comments to avoid spam and abuse. We're looking for comments that are interesting, substantial and/or highly amusing. HTML is not accepted.

You must supply a name and your email address.

 

Editor's Picks

Top 10 Firefox 3 Features

Slim Down Your Wallet with Your Phone

XBMC Turns Your Mac into the Ultimate Media Center

Get Your Party On with the Emergency Party Button

TimeTube Takes You Back in Video Time